Tuesday, August 6, 2019

Application of Hard-Soft Acid-Base Theory

Application of Hard-Soft Acid-Base Theory By Manolis J. Manos and Mercouri G. Kanatzidis Report Feven Teclemichael Hard-Soft Acid-Base Theory in Action: A New Ion-Exchange Material for Sequestering Heavy Metals The human body consists 75 percent of water, clean water is one of the prime elements responsible for life on earth. However, today many people drink water that is far from being pure. Inorganic minerals such as mercury (Hg), lead (Pb), and cadmium (Cd) are some of the powerful pollutants that make water unsuitable for human consumption and other living organisms. Over the years, a lot of effort has been gone into making drinking water as safe as possible by testing different methods to remove Hg2+, Pb2+ and Cd2+ ions from polluted water Some of the traditional ways of removing the above mentioned heavy metal ions is using oxidic inorganic ion-exchange materials such as Zeolites, clays and carbon activated adsorbent. Although these materials can remove heavy metals, they have a low selectivity and weak bonding affinity for heavy metal ions. Sulfide minerals such as FeS2 also have a low selectivity for heavy metals due to their property of instability in natural environment (i.e. when exposed to air and water it gets oxidized). To overcome these problems novel sorbents such as resins, organoceramics and mesoporous silicates as well as the recently noted mesoporous carbon material with thiol groups has been developed. However, these materials only showed a high selectivity for Hg2+. Similarly, Fe3O4 nanoparticles coated with humic acid also showed a reasonable but low selectivity for these soft heavy metals. On the other hand, unlike iron -based sulfides sulfide-based ion exchangers have a higher ability to remove heave metals ions regarding their functional group and surface property. This is due to their higher affinity of their soft basic framework for soft Lewis acids (e.g. Hg2+, Cd2+,Pb2+). One of sulfide-based material that has been found to be a high candidate for heavy metal ion remediation is K2xMnxSn3-xS6 (x=0.5-0.95) (KMS-1). K+ existing as +2, Mn as +4, Sn as +6 and S as -2 oxidation states. The layer structure of this material is built up by edge-sharing Mn/Sn S6 octahedral with Mn and Sn atoms occupying the same crystallographic position and all sulfur ligands being three-coordinated. K+ ions are found between the layers and are positionally disordered (Manos Kanatzidis, 2009). This material contains highly mobile K+ ions in their interlayer space that can easily be exchanged with other heavy cations (Manos Kanatzidis, 2009). KMS-1 is inorganic ion-exchanger that exhibits an excellent thermal, chemical and radiation stability in aqueous and atmospheric environments that can not be easily achieved with organic compounds. This material has previously been proved to be an excellent sorbent for strontium ions. Based on Manolis J. Manos and Mercoui G.Kanatzidis de tailed research this material has a extraordinary capacity to remove Hg2+ Pb2+, and Cd2+ very rapidly from water than any ever-known sorbent materials and has a high selectivity that allows their concentration to be reduced to well below the government allowed safe drinking levels under broad pH range (Manos Kanatzids, 2009). Based on this study this materials structure allows a rapid ion-exchange kinetics of the intercalated K+ ions with soft Lewis acids and binds to these soft heavy metal ions through a strong covalent interactions Metal-Sulfide framework of KMS-1. The experiment of ion-exchange is done by isolating a filtered polycrystalline material from the mixture of A(NO3)2.yH2O (0.07mmol) (A=Hg, Pb, Cd) with 20ml of water and a solid KMS-1 90.07mmol, 40mg). The filtrates were analyzed for their heavy metal content by using a coupled plasma-mass spectroscopy (ICP-MS). The energy-dispersive spectroscopy (EDS) data of the study has confirmed the removal of K+ ions as well as t he binding of the heavy metal ions. Two analyses were done to see how the interlayer spacing changed and to obtain information about the structural change after metal ion exchange material. These are the Power X-ray diffraction (PXRD) measurement and the Pair distribution function (PDF) analysis. PXRD data of Hg2+ exchanged material showed a decrease in the interlayer distance after the ion exchange. It changed from 8.51 ºÃ‚ ® to 5.82 ºÃ‚ ® this is because of the smaller size of Hg2+ compared to K+ as well as due to the strong covalent bond formed between Hg-S. This analysis also revealed the presence of two layered phases. These layers existed with interlayer spacing of 8.81 ºÃ‚ ®-8.09 ºÃ‚ ®. This information was also found in the two hydrated Pb2+ species analysis. Alkaline earth ions have a great tendency to be hydrated and this results for the Pb2+ exchanged materials. The Thermogravimetric analysis (TGA) data for exchanged samples revealed the presence of 1-2 H2O molecu les per formula unit. The process of Cd2+ exchange was different than Hg2+ and Pb2+ processes. Hg2+ and Pb2+ exchanged only with K+ ions where as Cd+2 exchanged not only with k+ but with Mn2+ ions of the layers as well. The EDS data of KMS-1 showed no detection of Mn even using ICP Mn ion was not identified. The molar ratio of Cd2+: KMS-1 in the exchanged material was found to be ~2 with a formula of Cd1.8Sn2.1S6 and no sign of Mn2+ ion. Cd2+ exchange also yielded in a colour change from dark-brown to orange-red. The TGA data of Cd2+ exchanged material revealed the presence of partially hydrated Cd2+ cation ~1-1.5 water molecules per formula unit and the PXRD indicated the consistency of interlayer contraction ~2.2 ºÃ‚ ® relative to KMS-1 strong Cd-S bonding interactions in the interlayer space (Manos Kanatzidis, 2009). Solid state near infrared-ultraviolet-visible (NIR-UV-Vis) spectroscopic studies was important to examine the intercalation of metal ions in pristine KMS-1. The expected covalent interactions between the sulfur atoms and intercalated cations are KPb(exchanged)>Hg(exchanged). The Cd2+ exchanged material band gap energy was measured to be 1.96ev; this result is consistent with its colour change from dark brown to orange-red. To assess the Hg2+, Pb2+and Cd2+ removal capacity of KMS-1, ion-exchange equilibration studies is performed using the batch method which is done in a V: m ratio of 1000:1 at a room temperature of pH 5. The ICP-MS determined the initial and final concentrations of the heavy metal ions. In order to have enough metal ions to saturate the exchange sites of K2xMnxSn3-xS6 (x=0.95) (the molar ratio M2+/KMS-1 was ~1), the initial concentration of Hg2+ and Pb2+ was much higher than Cd2+ since they can decompose to HgS or PbS unlike Cd2+. The Hg2+ and Pb2+ ion-exchange equil ibrium data was fitted with the Langmuir isotherm model expressed as , where q (mg/g) is the amount of the cation adsorbed at the equilibrium concentration Ce (ppm), qm is the maximum adsorption capacity of the adsorbent, and b (L/mg) is the Langmuir constant related to the free energy of the adsorption. The maximum ion-exchange capacity qm of KMS-1 (x=0.95) was determined to be 377 mg/g and 319 mg/g, respectively. The affinity for the metal ions can be expressed in terms of the distribution coefficient Kd value. Kd coefficient describes the sorption/desorption propensity of a compound for a material. For Hg2+ and Pb2+ the Kd values were found in the range 3.50*10^4-3.90*10^5 mL/g and 1.29*10^5-1.40*10^6 mL/g, respectively. The equilibrium exchange data of Cd2+ was fitted with the Freundlich model: q= KfCe(1/n), where Kf is the Freundlich constant. The maximum capacity was calculated by averaging Cd2+ uptake values that corresponds to the saturation of the exchange sites of KMS-1 an d it was found to be 329mg/g or 2.93mmol/g which is close to the theoretical value of 3.18mmol/g. The Kd value obtained for Cd2+ was 1.16 to 1.37*10^7mL/g which is larger compared to the initial concentration between 204.4 and 136.3ppm. The effect of pH on Hg2+ and Pb2+ adsorption was studied in the range of 2.6-9.4 and Cd2+ adsorption was tested in the pH range of 0-9, while taking into account that the pH of contaminated ground water and nuclear waste may vary in acidity. The Hg2+ ion exchange study of KMS-1 indicated a significant uptake at pH>4(Kd=1.1-1.3*10^4mL/g) compared to at pH~2.6 (2.3*10^5mL/g). For Pb2+ the maximum Kd value calculated for KMS-1 is at pH 3.7. The Kd value for Cd2+ revealed a remarkable affinity of KMS-1 under strong acidic condition (pH=0). For comparison, thiol-functionalized sorbents displays a loss of ~40-50% of their Cd2+ adsorption capacity at 3+ and Ca2+ was also examined for selectivity. The results showed a high selectivity for Hg2+ and Pb2+ even for Cd2+ since KMS-1 showed 86-88% removal of Cd2+ removal in the presence of 1M Na+ or Ca2+. Competitive-exchange Hg2+, Pb2+ and Cd2+ -Na+ experiment was performed in a very high or very low initial concentrations, these cations showed that KMS-1 has the ability of removing all 3 metal ions from solutions and shows a similar selectivity for solutions that contain a mixture of Hg2+, Pb2+ and Cd2+ in low initial concentrations. In final concentrations of the metal ions were found to be well below the acceptable levels for drinking water (Manos Kanatzidis, 2009). To check how capable is KMS-1 to select heavy metal ions under realistic environment, it was tested with drinkable water that has a pH of 6.5 and was contaminated intentionally with high levels of Hg2+, Pb2+ and Cd2+ that has excess amount of Na+, Ca2+, Mg2+ than the heavy metal ions. The results showed that within 40 min KMS-1 lowered the concentration of Hg2+, Pb2+ and Cd2+ below their acceptable limits. A high absorption of heavy metal ions by KMS-1 was observed by sonicating them for 30-60min when the particle size of pristine samples was reduced to à ¢Ã¢â‚¬ °Ã‚ ¤5 µm. This finding shows that pre-treated KMS-1 samples have a high ability to reduce the concentrations of heavy metal ions well below their acceptable levels after 2 min of solution/KMS-1 contact. These results prove that KMS-1 is highly capable of selecting and filtering contaminated waste water that contains traces of heavy metal ions. Mg-analogue of KMS-1 is developed to explain the concerns regarding Mn leaching (0.3-0.8% of the total manganese content at pH~5-8) during the use of KMS-1 to purify waste water. The analogue developed is denoted as KMS-2 (i.e. K2xMgxSn3-xS6 (x= 0.5-0.95)). The study indicated that KMS-1 and KMS-2 have not different capacity to purify heavy metal ions from water and have identical PXRD pattern. According to the study supporting information Mg2+ is non-toxic and a large level ppm of Mg2+ in water is acceptable. Since regeneration of exchanged materials is not possible under highly acidic environment of KMS-1 compounds, a test can be formulated to see if the exchanged materials can be considered as permanent waste forms without the need of secondary treatment. The study shows that first treatment results revealed no leaching of Pd2+ after its hydrothermal treatment at pH of ~7 or 4.8 for 24hrs. Similarly Hg2+ and Cd2+ only showed 0.05 and 0.09% of leaching, respectively. Whereas, the thermal treatment of Hg-laden samples for 60hrs at 450 °C showed 93% of leaching which is almost all the Hg2+ content has been regenerated. This process can be used to recover mercury element. This study showed the high efficiency of KMS-1 to absorb heavy metal ions and proved that it is one of the only materials that has a high capacity for Hg2+, Pb2+ at acidic condition (pH~3) and alkaline condition (pH~9), and highest for Cd2+ among all other state-of-the-art sorbents even at pHà ¢Ã¢â‚ ¬ °Ã‚ ¤0. However, thiol-functionalized mesoporous silicates resulted in a low absorption for Pb2+ at pH2 (layered sulfide) and thiol-functionalized sorbents is compared, KMS-1 has the highest because it is stable in water and atmosphere, on the other hand LiMoS2 and thiol-functionalized have less absorption capacity because they have instability nature under aerobic conditions. KMS-1 is a sulfide layered metal that exhibits a high capacity and highly specific ion-exchanger for the removal of soft heavy metals by replacing K+ in between the metal sulfide layers of KMS-1. The driving force for heavy metal ion-exchange is the strong heavy metal ion-sulfur bonds in addition to the facile ion diffusion and access of all internal surfaces of layered metal sulfides. It is a low-cost promising material that can be used to purify waste water by reducing the concentration toxic heavy metal ion (i.e. Hg2+, Pb2+ and Cd2+) well below acceptable limits for drinking water. HSAB theory elaborates that soft acids prefer bonding with soft bases, and the adduct of the result tends to form a covalent bond. Equivalently hard acids prefer bonding with hard bases, and their adducts form a stronger bond called ionic interactions (electrostatics attraction). This study provides a practical application of HSAB theory concepts. It proved that HSAB theory can be useful to identify compounds that can potentially be used in predicting toxicant-target interactions and the bonding mode can be determined using the principle. The main purpose of the study was to explore or discover a material that can reduce or remove major water pollutants such as Hg2+, Pb2+ and Cd2+.This study experiment reported a sulfide layered metal material that can rapidly remove toxic heavy metals from water called KMS-1. As per HSAB rule sulfur is considered to be a much softer base element therefore it prefers to bond with soft acid (e.g. Hg2+, Pb2+ and Cd2+).

Monday, August 5, 2019

Understanding the Ebola virus

Understanding the Ebola virus We have this belief that everything around us is not so dangerous. That animals the most dangerous part of them is the fact that they can bite you. There are strains and viruses that can kill you and not really realize it. Ebola is a deadly virus found in animals and passed on to humans. We can easily contract this virus from an animal without realizing it. It is not as contagious as most people may think but is very infectious. The common cold or measles are more likely to be contracted than the Ebola virus. As of 2014 we have had one of the largest outbreaks so far in recorded history. Research says that the virus mainly came from the handling of monkeys or chimpanzees. The Ebola virus was originally locates in Africa. In the United States there were only 4 cases found and 1 death reported. Liberia has the most recorded death rate @ 4,809. Sierra Leone has had the most recorded outbreak in history with numbers as high as 14,124 on record. Some say that the US government had something to do with the outbreak. Nothing is concrete as of yet. We are easily exposed to the virus because we deal with animals all the time. It can be transmitted from animal to human through bodily fluids and or blood secretion. Because so many animals are coming from other countries we cannot determine what animal may or may not be carrying the virus. There is another agency that is invoved as well as the CDC. They are called the WHO (The World Health Organization).ÂÂ   If Ebola is detected in a person the CDC will be contacted immediately. They may ask if you have traveled out of the country in the last 3 months and have been in contact with any animals. Personal information also may be asked as far as your sex life in the last three months. Ebola can be transmitted through sexual intercourse if you have the virus. You may not know if you have the virus because the symptoms are more like flu symptoms. It may take anywhere from 8-10 days after exposure for anything to appear. In some cases it has been detected as early as 2 days. The virus may last as long as twenty one days. Some symptoms may appear as simple as a headache, muscle pain, vomiting and even being tired. These symptoms may be mistaken for malaria. Ebola can be diagnosed with a simple blood test. The blood test will detect low platelets, elevated liver enzymes, and low and high white blood cell count if there is any detection of the Ebola virus. If there is any detection, a person would undergo isolation. This is where a person would be in a room that can be monitored closely until the virus is controlled. It is said for all workers to wear gowns, eye wear, mask, and all PPE available to you to reduce risk of exposure. The recovery time is at seven to fourteen days after exposure. The timeline for the a person who is not going to recover would be between six and sixteen days. There will be no signs of a person getting any better. The symptoms will get worse. There is no known cure or vaccination for the Ebola virus. If treated the virus may be controlled with medication to maintain blood pressure. A person may be given extra oxygen or iv fluids to keep you hydrated. There were two American missionaries that became infected and were given an experimental drug called ZMapp which seems to have worked. It has been said that chlorine, disinfectant, soap, and even detergents may kill the virus. As of today the virus is not known to be airborne. It can only be transmitted through direct fluids. There are many more experimental drugs but are very costly to bring forth. There are four strains of the Ebola virus that can be transmitted into humans. The best way for you not to get the virus is not to travel in any of the areas where the virus is located. References Lightsey, Ross F. Fighting Ebola: an interagency collaboration paradigm. Joint Force Quarterly, Apr. 2016, p. 62+. Academic OneFile, go.galegroup.com/ps/i.do?p=AONEsw=wu=lirn92264v=2.1id=GALE%7CA456758336it=rasid=282ffbb92ee8f927f987f7995b4aea43. Accessed 28 Mar. 2017. Lightsey, Ross F. Fighting Ebola: an interagency collaboration paradigm. Joint Force Quarterly, Apr. 2016, p. 62+. Academic OneFile, go.galegroup.com/ps/i.do?p=AONEsw=wu=lirn92264v=2.1id=GALE%7CA456758336it=rasid=282ffbb92ee8f927f987f7995b4aea43. Accessed 28 Mar. 2017. Lightsey, Ross F. Fighting Ebola: an interagency collaboration paradigm. Joint Force Quarterly, Apr. 2016, p. 62+. Academic OneFile, go.galegroup.com/ps/i.do?p=AONEsw=wu=lirn92264v=2.1id=GALE%7CA456758336it=rasid=282ffbb92ee8f927f987f7995b4aea43. Accessed 28 Mar. 2017. Bray M. Diagnosis and treatment of Ebola and Marburg hemorrhagic fever. http://www.uptodate.com/home. Acces

Sunday, August 4, 2019

Essay --

During the Elizabethan era, many great works were created. Many of these great works were made by none other than William Shakespeare. His plays were exquisitely made in a formal type of language that even people of the late 1500’s didn’t speak like. Besides his success as a playwright, Shakespeare also found great success as a poet and actor. Some of his most famous works, such as Julius Caesar, Romeo and Juliet, and Hamlet, led him to, by many, being called the greatest writer of all time. If you are familiar with this great man and the famous works that he created, then maybe this paper will show you just why he is regarded as the greatest writer of all time. Hamlet is one of Shakespeare’s more famous works and it has a very unique script of characters in it. The main character, Hamlet, is the Prince of Denmark. His father was the King of Denmark before his tragic death. Throughout the play, Hamlet shows his detestation towards his mother’s excessive sexuality and his hatred towards his uncle and the present king, Claudius. Though it may not seem like it at times, Hamlet is actually a very brilliant man who studied at the University of Wittenberg. Sometimes he is very quick tempered and impulsive, but most of the time he thinks through things before doing them. Claudius is the uncle of Hamlet, who took the throne after his brother was killed. Claudius is very cautious and is always calculating the effects of his actions. Most of the time Claudius seems to be very inhuman and only driven by the lust for more power and sex. Very seldom does he show his side of guilt for things he has done and his deep affection for Gertrud e. Gertrude is the present wife of Claudius and mother of Hamlet. She is also the Queen of Denmark.... ... appear to be the people wanting him to be in power. Around this time Calphurnia has a dream about Caesar having a bunch of holes in him and there is blood flowing out of him like a fountain. She obviously interprets this as a bad omen for Caesar and is concerned. This and other occurrences such as fire raining down from the sky and his priests not being able to find a heart in a sacrificed animal lead to him wanting to stay home. But, Decius tells Caesar that his dreams mean he is going to save Rome. Caesar is motivated and decides that fate will have its way no matter what. He decides to go the the Capital anyways, against his wife’s wishes. On the way to the Capital, Caesar runs into Artemidorus who tries to give him a letter warning him of the conspirators. Caesar doesn’t take the letter and Artemidorus knows that the fates are on the side of the conspirators.

Saturday, August 3, 2019

Analysis of Harlem by Langston Hughes Essay -- Harlem Langston Hughes

Analysis of Harlem by Langston Hughes Through the turbulent decades of the 1920's through the 1960's many of the black Americans went through difficult hardships and found comfort only in dreaming. Those especially who lived in the ghettos' of Harlem would dream about a better place for them, their families, and their futures. Langston Hughes discusses dreams and what they could do in one of his poems, "Harlem." Hughes poem begins: "What happens to a dream deferred..." Hughes is asking what happens to a dream that is being put off. What do these dreams do, do they do good, do they do bad, or do they do neither good nor bad? He continues by stating this simile:"Does it dry up like a raisin in the sun?" Using this simile he is stating that dreaming can be good or bad. A raisin is a grape that has been dehydrated by the sun. Hughes is conveying that dreams can suck the life out of a person, mentally dehydrating them. However a raisin is not necessarily bad. When the grape is dehydrated by the sun it turns the grape into a raisin, a sweet and delightful friut which can furnish ...

Friday, August 2, 2019

Planning a Karaoke Party :: Process Essays

You're sitting at home planning a party. You've got your list of invitees down. A cupboard full of chips and dips, and a cooler full of beer. You go to your computer and start putting together some mix Cd's of your favorite music. As you gather the songs you notice yourself singing along with one, and your eyes widen, lit up as you a struck with an idea. "I should have Karaoke at my party!" Brilliant! What could be more fun that a Karaoke party? The answer: a lot of things, if you're not careful! While Karaoke is a pass time enjoyed by people of every age, race and gender, it's also something you have to be in the mood for. So what happens if people show up to your party and aren't in the mood for Karaoke? Get them in the mood. There are three basic steps to throwing an amazing Karaoke party, and it all starts with invitations. Step 1: Inviting your guests With any luck, everyone at your party will have a blast, but do you know who won't? The people who don't show up! Karaoke is always fun with a good sized crowd, but if you aren't careful, you may loose half of your guests. It's all about how you present your invitation. There are two different types of people you will be inviting to the party; people who love karaoke, and people who like karaoke. The difference is this... People who LOVE karaoke - Make sure they know this is a karaoke party! This will be the smaller of the two types, but they are also the most important. They will go out of their way to attend, and you will need them during the party. People who LIKE karaoke - The easiest way to help ensure they will come is to avoid mentioning karaoke, and just tell them you are having a party. Why? While it is true that they enjoy karaoke, if they realize your party will focus around this activity, come party day they may think, "I'm not really in the mood." With people who just like karaoke, this can often be the case, and the number of people attending can make or break a party. Step 2: The supplies First and foremost is the karaoke machine. RENT ONE! Unless you own a professional karaoke machine, you should get one. This might seem a little expensive, if you buy yourself a cheap one and then try to supply yourself with a good selection of music, you'll end up spending a lot more, and getting a lot less.

Thursday, August 1, 2019

Elizabethan Women Essay

The social standards for most women of high nobility were to wear large corseted dresses and apply pallid makeup (History of Elizabethan Women). These women were not allowed a say in anything. They had to follow what the male said; however, if they did not, they would have received a harsh punishment (Elizabethan Women). Therefore the majority of these women would learn to obey quickly. In the Elizabethan Era the upper class women are not permitted to work because they were considered not as strong, or as deft as men(Elizabethan Women). For example, in the movie Shakespeare In Love, women were not permitted to be actresses because it was illegal and extremely inappropriate for a woman to be seen on stage. Viola de Lesseps loved poetry; therefore, she auditioned for Shakespeare’s play dressed as a boy. She went against the advice of her maid and later got caught by the stage master. In the film, she defied the queen’s law but the queen overruled her mistake because of the bet the queen had with Lord Wessex. During the Elizabethan Era there were a plethora of family alliances formed by arranged marriages. In the film, Shakespeare In Love, Viola de Lesseps was coerced into a marriage with Lord Wessex at a very inopportune time. She was in love with Will Shakespeare, but the majority of women in this era were not allowed a say in these affairs (History of Elizabethan Women). These women suppressed their emotions for the man they loved. She was obliged to marry Lord Wessex and follow her father and mother’s orders although she was in love with another man. While women of today prefer have very dark, tan skin, most women from the Elizabethan Era preferred pale white skin. In fact the whiter you were the wealthier you looked because most of the lower class women worked outside which was why they were so tan (Elizabethan Women). Their dark skin tones showed they worked for their money while the upper class women stay indoors most of the day. For example, in Shakespeare In Love, Viola de Lesseps always had a pale face with a big flouncy dress on. She never looked rampant like the street children or their mothers, but always stately and noble. John Madden fairly and accurately demonstrates how women were treated in the Elizabethan Era in his film, Shakespeare In Love. He shows the intricate clothing and colorless make up of these noble women. Also he explains the unfair and loveless arranged marriages that often occurred in the Elizabethan Era.

New World slave societies Essay

Coercion and abuse experienced by enslaved people in New World slave societies have tended to focus on violence. This is how it should be because experiencing or witnessing violence was indeed an everyday part of life for slaves. Violence inflicted by slave holders on enslaved people did not take place in a vacuum. It was also meet with and often proceeded by abusive words. Yet while debates around negotiation, slave resistance and paternalism focus in detail on the cultural and discursive context of these relationships, discussions of violence tend to home in on their purely physical aspects. I will be discussing the context of violence in a society undergoing the transition from slavery to a post slave society in the West Indies. Abusive language was sometimes used in place of physical punishment and served as a substitute for personal violence in situations where physical punishment was not allowed. A period known as the apprenticeship period in Jamaica, 1834-38 slaveholders lost the legal right to directly punish their un-free workers so instead used abusive language. But fear is fear whether it is felt physically or verbally the threat was still present. The people of the West Indies today are mainly of African decent. Important minorities are East Indians, mainly Trinidad, Chinese and Europeans of British, French, Spanish, Dutch and Portuguese. There are also many people of mixed blood and racial and cultural mixtures that makes the West Indies one of the more cosmopolitan areas of the world. The most important industry in the past and in the present day is the growing of sugar cane. Other crops include citrus fruit, bananas, spices, coca, coffee, tobacco and coconuts. All of these are agricultural and very labor intensive. The British colonialization of the West Indies brought slavery into the social context. Toussaint L’ouverture led a successful revolt in Haiti. The efforts of Englishmen like William Wilberforce helped bring an end to the slave trade to the New World and eventually led to the emancipation of slaves in British colonies. When European countries began their overseas explorations and colonization in the 15th century, the institution of slavery experienced a revolution. The discovery of the West Indies opened a new era. In every colony prosperity depended upon the production of some article which could be profitably exported, such as coffee, sugar and indigo. These crops called for large scale operations and cheap labor. Wage laborers were not available and it was necessary to resort to some type of compulsion to secure workers. The Indian appeared to be the obvious answer, utilized the institutions of tributary labor and repartimiento, the granting of land along with the Indians living on it. The Indians proved unsuitable for forced labor. They died off rapidly under oppression and even resorted to mass suicide and infanticide. Their number declined to the point of extinction. The Europeans turned to the African as a solution to their labor problems. The African was not unknown to Europeans prior to the 15th century, but there were very few Africans in Europe. The Portuguese exploring the Atlantic coast of Africa brought back two African slaves and subsequent expeditions resulted in the purchase or capture of other slaves. At this time Portugal faced a manpower shortage and African slaves proved to be the solution to its problems. By 1460, 700 to 800 were being imported annually. Spain soon followed the example of Portugal and adopted the importation of African slaves. It was not surprising that the colonists in the New World should have thought of the African slave when they needed labor.